SHARE
Unidentified Network no Internet Access
Unidentified Network no Internet Access

As far as the use of internet is growing and people use the internet on the daily basis, but when you find any problem on internet and your internet stopped working then it sucks
If you are a computer user and using LAN connection then you might be having this problem of Unidentified Network No Internet Access.
when you hover over your LAN connection then it will show you this term “Unidentified Network No Internet Access.”
It doesn’t mean that your operator is not giving you internet access but the problem is in your system and your system is not able to identify your LAN connection and you are having no network access.
For this problem, we are giving you the two quick solutions, you must follow below steps to fix this problem.

Method 1: Solving Unidentified Network No Internet Access using command prompt.

Step 1: Run command Prompt as Administrator.

Run command prompt as administrator
Run command prompt as administrator

Step 2: Type netsh winsock reset

Type netsh winsock reset
Type netsh winsock reset

Step 3: Type netsh int ip reset

Type netsh int ip reset
Type netsh int ip reset

Step 4: Type ipconfig /flushdns

Type ipconfig /flushdns
Type ipconfig /flushdns

Make sure that all the above commands are successfully completed. After the completion of all commands reboot/restart your PC.

If the first method not working for you, then you should follow the below method to get rid of this problem.

Method 2: Solving Unidentified Network No Internet Access By changing TCP/IPv4 address

Step 1: Open Control Panel

Unidentified Network No Internet Access for window 7, 8, 10(Solution)
Control Panel

Step 2: Open Network and Internet

Unidentified Network No Internet Access for window 7, 8, 10(Solution)
Network and Internet

Step 3: Go to Network and Sharing Center and Open Ethernet, It will take you to the Ethernet Status.

Open Ethernet
Ethernet Status

 

Step 4: Click on Properties and select Networking.

click on properties
Ethernet properties

Step 5: Click Internet protocol version 4(TCP/IPv4) and Select the option Use the following IP address.

Fill these addresses on boxes given.

IP address: 192.168.1.101

subnet mask: 255.255.255.0

Default gateway: 192.168.1.1

preferred DNS server: 192.168.1.1

Alternate DNS server: 218.248.243.23

 Click Internet protocol version 4
Click Internet protocol version 4

Hope the above methods worked for you. If you still got this problem let us know about it. we will happy to help you.

Also read: Best Linux Distro

LEAVE A REPLY

Please enter your comment!
Please enter your name here